The JetStick Z4 stick is designed to work as a Zigbee coordinator or router and can be used to control other home infrastructure wireless devices that operate via the Zigbee protocol as part of a Smart Home controller with the appropriate software installed and configured.

The stick is based on a modern Silicon Labs EFR32MG21A020F1024IM32 multi-protocol wireless microcontroller for the 2.4 GHz band and features high performance, increased transmitter output power and compact size .

: add chip characteristics

Overall dimensions of the stick in the case without an external antenna: 62 x 18 x 10 mm.

The package includes an external 2.4 GHz antenna. The stick can also be used with other external 2.4GHz antennas. To connect an external antenna, use the RP-SMA connector installed on the stick board.

On the board of the stick are also placed:

• button to switch the boot mode of the microcontroller (used to flash the microcontroller). The case must be opened to access the button;
• two LEDs (green and red) that can be used to display stick operation modes. The operation of the LEDs depends on the firmware installed in the microcontroller stick.

The stick is intended for use in residential and office premises. Operating conditions:

• Ambient temperature: 0..+40 С;
• Relative air humidity up to 80% without moisture condensation;
• Closed rooms without aggressive vapors and gases.

The stick comes pre-installed with public firmware or based on it (see p. Supported Firmwares). The manufacturer is not responsible for possible incorrect operation of the stick software.

Attention! This device is not professional equipment for security and control systems. And it cannot be used on objects that potentially pose a danger to the life and health of others.

: Add the rest of information