Using Zigbee JetHome devices with Zigbee2MQTT

Erase NVMEM(NVRAM) with Zigbee2MQTT

  1. Stop Zigbee2MQTT
  2. In the directory with Zigbee2MQTT installed, run:
node scripts/zStackEraseAllNvMem.js /dev/ttyUSBxxxx # Replace with your USB port, usually /dev/ttyUSB0 for a stick or /dev/ttyAML2 for controllers

Migrating between different 2538/2652 Zigbee2MQTT adapters

  1. Restart Zigbee2MQTT
  2. We are waiting for 5 minutes for the whole network to work.
  3. Stop Zigbee2MQTT
  4. Insert a fresh stick (mandatory with reset NVMEM)
  5. Run Zigbee2MQTT, wait a few minutes, look at the logs (usually recovery can take up to 5 minutes, depending on the number of devices).
  6. 99% of devices should work
en/jethome_zigbee2mqtt.txt · Last modified: 2022/01/22 12:12 by Dmitriy