|
|
|
en:cc2652p_firmware [2022/01/22 11:45]
Dmitriy created |
en:cc2652p_firmware [2022/02/02 20:02] (current)
Leonid Titov |
| FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)// | |
| |
| ====== Software for sticks and modules based on TI CC2652P1 chip ====== | ====== Software for sticks and modules based on TI CC2652P1 chip ====== |
| |
| **JetHome devices come pre-installed with software. The manufacturer does not recommend flashing their devices and only supports devices with factory pre-installed firmware or the firmware listed below in the "Recommended Firmwares" section.** | **JetHome devices are shipped with pre-installed firmware. The manufacturer does not recommend flashing their devices and only supports devices with factory pre-installed firmware or the firmware listed below in the "Recommended Firmwares" section.** |
| |
| When working with Zigbee2MQTT before flashing, read and follow the recommendations for migrating to a new stick or new software: [[jethome_zigbee2mqtt]] | When working with Zigbee2MQTT before flashing, read and follow the recommendations for migrating to a new stick or new software: [[jethome_zigbee2mqtt]] |
| **Important: Third party firmware may not be compatible or supported by JetHome devices. Therefore, JetHome devices are not guaranteed to work with third-party firmware.** | **Important: Third party firmware may not be compatible or supported by JetHome devices. Therefore, JetHome devices are not guaranteed to work with third-party firmware.** |
| |
| JetHome modules and sticks based on the reference design [[https://www.ti.com/tool/LAUNCHXL-CC1352P|TI LAUNCHXL-CC1352P-2]] can also be installed with software (firmware) supported by the CC2652P1 chip and calculated to work on the TI LAUNCHXL-CC1352P-2 board: | JetHome modules and sticks based on the reference design [[https://www.ti.com/tool/LAUNCHXL-CC1352P|TI LAUNCHXL-CC1352P-2]] can also be installed with software (firmware) compatible with the CC2652P1 chip and known to work on the TI LAUNCHXL-CC1352P-2 board: |
| * [[https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator/Z-Stack_3.x.0/bin/|Zigbee coordinator firmware from the Zigbee2MQTT project]] In this firmware at the moment (version 20210708) Implemented the operation of one LED to indicate the joining mode. | * [[https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator/Z-Stack_3.x.0/bin/|Zigbee coordinator firmware from the Zigbee2MQTT project]] In this firmware at the moment (version 20210708) only one LED is supported, which indicates the joining mode. |
| * [[https://github.com/Koenkk/Z-Stack-firmware/tree/master/router/Z-Stack_3.x.0/bin/|Zigbee router firmware from the Zigbee2MQTT project]] | * [[https://github.com/Koenkk/Z-Stack-firmware/tree/master/router/Z-Stack_3.x.0/bin/|Zigbee router firmware from the Zigbee2MQTT project]] |
| |
| **Use firmware with file name: //CC1352P2_CC2652P_launchpad_*//** | **Use firmware with file name: //CC1352P2_CC2652P_launchpad_*//** |
