JetHome wiki

User Tools

Site Tools

You are here: JetHome - оборудование для умного дома » JetHome - smart home equipment » Flashing TI CC2538/CC2652 modules and sticks using the cc2538-bsl utility
Trace:
en:cc2538_bsl_manual  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
en:cc2538_bsl_manual [2022/01/22 11:46]
Dmitriy created 		en:cc2538_bsl_manual [2022/02/02 19:57] (current)
Leonid Titov
Line 1: Line 1:
-FIXME **This page is not fully translated, yet. Please help completing the translation.**\\ //(remove this paragraph once the translation is finished)// 
- 
 ====== Flashing TI CC2538/CC2652 modules and sticks using the cc2538-bsl utility ====== ====== Flashing TI CC2538/CC2652 modules and sticks using the cc2538-bsl utility ======
  
 You can update the module or stick firmware via a serial port using the built-in serial bootloader in the CC2538 and CC2652 microcontrollers using the [[https://github.com/JelmerT/cc2538-bsl.git|cc2538-bsl]] utility. You can update the module or stick firmware via a serial port using the built-in serial bootloader in the CC2538 and CC2652 microcontrollers using the [[https://github.com/JelmerT/cc2538-bsl.git|cc2538-bsl]] utility.
  
-**Important: to flash the device via the serial port, the device must be put into bootloader mode. The procedure for entering bootloader mode depends on the software installed on the device and may not be compatible or supported by JetHome devices. Therefore, the operation of the mechanism for switching to bootloader mode for third-party firmware is not guaranteed. Use only recommended firmware. See [[::cc2538_firmware]] and [[::cc2652p_firmware]]**+**Important: to flash the device via the serial port, the device must be put into bootloader mode. The procedure for entering bootloader mode depends on the software installed on the device and may not be compatible or supported by JetHome devices. Therefore, the operation of the mechanism for switching to bootloader mode for third-party firmware is not guaranteed. Use only recommended firmware. See [[cc2538_firmware]] and [[cc2652p_firmware]]**
  
 ==== Installing the utility ==== ==== Installing the utility ====
Line 53: Line 51:
 ==== Automatic switch to bootloader mode for sticks ==== ==== Automatic switch to bootloader mode for sticks ====
  
-JetHome sticks have the ability to automatically reset the stick and switch it to bootloader mode for flashing without having to disconnect the stick from the USB port and press a button on it. {{::cc2538-bsl-20210217.zip|modified version of cc2538-bsl}} is required to use this feature.+JetHome sticks have the ability to automatically reset the stick and switch it to bootloader mode for flashing without having to disconnect the stick from the USB port and press a button on it. {{:cc2538-bsl-20210217.zip|modified version of cc2538-bsl}} is required to use this feature.
  
 This version of the utility has added the //--invoke-bootloader=METHOD// command line option, which sets the algorithm used to switch to bootloader mode. Available values ​​for the METHOD parameter: This version of the utility has added the //--invoke-bootloader=METHOD// command line option, which sets the algorithm used to switch to bootloader mode. Available values ​​for the METHOD parameter:
en/cc2538_bsl_manual.1642841173.txt.gz · Last modified: 2022/01/22 11:46 by Dmitriy

Page Tools