How to use Zigbee Home Automation (ZHA) for Home Assistant

All JetHome controllers and sticks are supported in the Zigbee Home Automation system.

To connect, you need to add a new integration to Home Assistant. Check that the zigbee adapter is not busy with another process (zigbee2mqtt, for example).

1.jpg

Device type must be selected ZNP Texas Instruments Z-Stack

3.1.jpg

4.jpg

In the connection settings, you must correctly specify the port where the adapter is located. For JetHub D1 and H1 controllers, the port for the embedded adapter must be /dev/ttyAML2. Connection speed 115200, leave data flow control unselected.

5.jpg

With the right settings selected, the connection will succeed.

6.jpg