Software for modules based on TI CC2538 chip

Important: Third party firmware may not be compatible or supported by JetHome devices. Therefore, JetHome devices are not guaranteed to work with third-party firmware. Use only recommended firmware below.

To work with the Zigbee protocol for JetHome modules based on the CC2538+CC2592 chip, it is recommended to use the following firmware:

• Firmware for working as a Zigbee coordinator: https://github.com/jethome-ru/zigbee-firmware/tree/master/ti/coordinator/cc2538_cc2592 (When connecting the module via UART, the ZNP_UART firmware option is required, when connected via USB - ZNP_USB At the time of writing, the latest stable firmware version is 20201010).